The bags were
composed of rubber-proofed fabric lined with gold-beater's skin
to reduce permeability, and when completely full gave a total
volume of 890,000 cubic feet. Two types of valve were fitted to
each bag, one the Parseval type of valve with the pressure cone
as fitted in No. 1, the other automatic but also controlled by
hand.
To distribute the pressure evenly throughout the upper
longitudinal frames, and also to prevent the gasbags bulging
between the girders, nets were fitted throughout the whole
structure of the hull.
The whole exterior of the ship was fitted with an outer cover, to
protect the gasbags and hull framework from weather and to render
the outer surface of the ship symmetrical and reduce "skin
friction" and resistance to the air to a minimum. To enable
this cover to be easily removed it was made in two sections, a
port and starboard side for each gasbag. The covers were laced
to the hull framework and the connections were covered over with
sealing strips to render the whole weathertight.
The system of fins for stabilizing purposes on No. 9 were two--
vertical and horizontal. The vertical fin was composed of two
parts, one above and the other below the centre line of the ship.
They were constructed of a framework of duralumin girders,
covered over with fabric.
Pages:
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131